Lathe Power Collet Chucks - Workholding Accessories

5C Quick Change Collet Chuck (Pratt Burnerd)

This Collet Chuck can be used for turning or milling, front mount with recessed back....

Quickly change from chuck work to collet works
Mount in vertical mills, horizontal mills and machining centers
Drilled and tapped for fixture mounting

Starting at €1,289.05 €1,074.21

View Products

Manual Collet Chuck (Bison)

This Collet Chuck can be used for turning or milling, front mount with recessed back....

Front mount with recessed back
Can be used for turning or milling

Starting at €683.66 €569.72

View Products

Quick Gun Change Direct Mount Pull Back Lathe Collet Chuck - DKF Series (Klamp)

Fully compatible with DT collects (quick gun change style). Pull back type with direct mount system that mounts directly to the spindle to ensure a consistent mounting without the need for correction....

Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
First operation collet chuck: Klamp DHP collet chucks are suitable for collets which have a +/-0.5mm gripping range.
The collet chuck is suitable for rough and unfinished bar, preparing it for a high accuracy second operation work.
Pull back action: The collet is pulled into the chuck to close and pushed out to open. This action means that back stops cannot be provided and must be used where accurate axial positioning is not important.
Case hardened: Optimising the rigidity, strength and durability.
Short body, wide range: DT collets allow for a compact body design maximising the lathe work envelope. Gripping capacities of the series range from 3mm to 80mm.
Made in the United Kingdom

Starting at €1,632.02 €1,360.02

View Products

Quick Gun Change Direct Mount Fixed Length Lathe Collet Chuck - DKF Series (Klamp)

Fully compatible with DT collects (quick gun change style). Fixed length type with direct mount system that mounts directly to the spindle to ensure a consistent mounting without the need for correcti...

Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
First & second operation collet chuck: Designed with a fixed length actuation system that ensures the collet is held stationary. Allowing the collet chuck to be used in bar feeding operations and highly accurate second operations.
Klamp DKF collet chucks are suitable for collets which have a +/-0.5mm gripping range.
Fixed length: Workpiece remains in a fixed position during actuation allowing for precise z-axis positioning. A tapered sleeve is pushed forward, compressing the collet & gripping the workpiece.
Case hardened: Optimising the rigidity, strength and durability.
Short body, wide range: DT collets allow for a compact body design maximising the lathe work envelope. Gripping capacities of the series range from 3mm to 80mm.
Made in the United Kingdom

Starting at €2,884.51 €2,403.76

View Products

Short Body Direct Mount Lathe Collet Chuck - CRS Series (Klamp)

Fully compatible with Crawford, Varibore, Multibore, Rubberflex & spring collets. Standard fixed nut, short body type with direct mount system that mounts directly to the spindle to ensure a consisten...

Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
First operation collet chuck: Suitable for collets which have a large gripping range.
Allowing the collet chuck to handle very rough and unfinished bar, preparing it for a high accuracy second operation (NOT SUITABLE FOR SPRING COLLETS).
Fixed length collet: Workpiece remains in a fixed position during actuation allowing for precise z-axis positioning.
A tapered sleeve is pushed forward, compressing the collet & gripping the workpiece.
Ideal for bar feeders: Designed to work with bar loaders and bar feeders by not interfering with the process of the bar feeder action.
Case hardened: Optimising the rigidity, strength and durability.
Made in the United Kingdom

Starting at €2,477.88 €2,064.90

View Products

Long Body Direct Mount Lathe Collet Chuck - CRL Series (Klamp)

Fully compatible with Crawford, Varibore, Multibore, Rubberflex & spring collets. Standard fixed nut, long body type with direct mount system that mounts directly to the spindle to ensure a consistent...

Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
First & second operation collet chuck: Suitable for spring, varibore and rubberflex collets increasing its flexibility.
Fixed length collet: Workpiece remains in a fixed position during actuation allowing for precise z-axis positioning.
A tapered sleeve is pushed forward, compressing the collet & gripping the workpiece.
Ideal for bar feeders: Designed to work with bar loaders and bar feeders by not interfering with the process of the bar feeder action.
Case hardened: optimising the rigidity, strength and durability.
Made in the United Kingdom.

Starting at €1,626.60 €1,355.50

View Products

Quick Change Modular Lathe Collet Chuck - Q-CRL Series (Klamp)

New and improved ‘Crawford style’ CNC collet chuck with a quick change nut. Fully compatible with Crawford, Varibore, Multibore, Rubberflex & spring collets. As per the direct mount system, which ...

As per the direct mount system except with interchangeable adaptors enables the collet chuck to be moved from one machine spindle nose to another.
Cost-effective as only additional adaptors and connectors are required.
The need for adjustment is minimal, meaning less machine downtime.
Made in the United Kingdom.

Starting at €1,903.13 €1,585.94

View Products

Quick Change Direct Mount Lathe Collet Chuck - Q-CRL Series (Klamp)

New and improved ‘Crawford style’ CNC collet chuck with a quick change nut. Fully compatible with Crawford, Varibore, Multibore, Rubberflex & spring collets. Direct mount system mounts directly to...

Direct mount: This system mounts directly to the spindle to ensure a consistent mounting without the need for correction.
First & second operation collet chuck: Suitable for spring, varibore and rubberflex collets increasing its flexibility.
Fixed length collet: Workpiece remains in a fixed position during actuation allowing for precise z-axis positioning.
A tapered sleeve is pushed forward, compressing the collet & gripping the workpiece.
Case hardened: Optimising the rigidity, strength and durability.
Made in the United Kingdom.

Starting at €1,976.38 €1,646.98

View Products