Milling Power Chucks | Cutwel - Tool Holding Specialists

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Size

Diameter (mm)	20 - 32

Starting at €262.20 €218.50

View Products

BT50 Power Milling Chuck Kits (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Contains tool holder, 5-7 sleeves & wrench
Balanced to G6.6 12,000RPM
Highest clamping torque, exceptional performance in roughing
0.003mm run-out

Size

Diameter (mm)	20 - 32

Starting at €310.78 €258.98

View Products

SK50 Power Milling Chuck Kits (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Contains tool holder, 5-7 sleeves & wrench
Balanced to G6.6 12,000RPM
Highest clamping torque, exceptional performance in roughing
0.003mm run-out

Size

Diameter (mm)	20 - 32

Starting at €310.78 €258.98

View Products

HSK50 Power Milling Chuck (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Size

Diameter (mm)	20 - 20

Starting at €691.91 €576.59

View Products

HSK63 Power Milling Chuck (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Size

Diameter (mm)	20 - 32

Starting at €691.91 €576.59

View Products

BT50 Power Milling Chuck (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Size

Diameter (mm)	20 - 32

Starting at €346.91 €289.09

View Products

SK40 Power Milling Chuck (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Size

Diameter (mm)	20 - 32

Starting at €272.82 €227.35

View Products

SK50 Milling Chuck Set (YG-1)

YG-1 milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of milling c...

Starting at €351.96 €293.30

View Products

SK40 Milling Chuck Set (YG-1)

YG-1 milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of milling c...

Starting at €273.18 €227.65

View Products

HSK50A Power Milling Chuck (YG-1)

YG-1 premium milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity

Size

Diameter (mm)	20 - 20

Starting at €249.08 €207.57

View Products

SK50 Power Milling Chuck (YG-1)

YG-1 premium milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity

Size

Diameter (mm)	20 - 32

Starting at €202.34 €168.62

View Products

BT50 High Speed Power Milling Chuck, 20,000RPM G6.3 (YG-1)

High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...

Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter

Size

Diameter (mm)	20 - 32

Starting at €306.28 €255.23

View Products

BT40 High Speed Power Milling Chuck, 20,000RPM G6.3 (YG-1)

High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...

Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter

Size

Diameter (mm)	20 - 32

Starting at €245.46 €204.55

View Products

BT30 High Speed Power Milling Chuck, 20,000RPM G6.3 (YG-1)

High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...

Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter

Size

Diameter (mm)	20 - 25

Starting at €238.15 €198.46

View Products

SK50 High Speed Power Milling Chuck, 20,000RPM G6.3 (YG-1)

High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...

Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter

Size

Diameter (mm)	20 - 50

Starting at €288.80 €240.67

View Products

SK50 Power Milling Chuck (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Size

Diameter (mm)	20 - 32

Starting at €346.91 €289.09

View Products

BT40 Power Milling Chuck (YG-1)

YG-1 premium milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity

Size

Diameter (mm)	20 - 32

Starting at €163.66 €136.38

View Products

SK40 Power Milling Chuck (YG-1)

YG-1 premium milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity

Size

Diameter (mm)	20 - 32

Starting at €167.18 €139.32

View Products

HSK100A High Speed Power Milling Chuck, 20,000RPM G6.3 (YG-1)

High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...

Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter

Size

Diameter (mm)	20 - 32

Starting at €489.73 €408.11

View Products

HSK63A High Speed Power Milling Chuck, 20,000RPM G6.3 (YG-1)

High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...

Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter

Size

Diameter (mm)	20 - 32

Starting at €392.65 €327.21

View Products

SK40 High Speed Power Milling Chuck, 20,000RPM G6.3 (YG-1)

High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...

Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter

Size

Diameter (mm)	20 - 32

Starting at €250.76 €208.97

View Products

SK30 High Speed Power Milling Chuck 20,000RPM G6.3 (YG-1)

High speed premium YG-1 milling chuck are balanced to G6.3 20,000RPM for high speed machining. These chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill ho...

Balanced to G6.3 20,000RPM
Under 0.01mm run out at 3xD
Maximum torque power clamping
Ideal for rough or indexable milling as well as high speed finishing
For direct clamping or use with sleeves
AD through coolant
AT3 taper tolerance for highest spindle rigidity
Clamping torque ranging from 980Nm - 3,430Nm depending on clamping diameter

Size

Diameter (mm)	20 - 25

Starting at €238.15 €198.46

View Products

SK40 Power Milling Chuck Kits (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Size

Diameter (mm)	20 - 32

Starting at €262.20 €218.50

View Products

HSK100 Power Milling Chuck (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Size

Diameter (mm)	20 - 32

Starting at €793.21 €661.01

View Products

BT40 Power Milling Chuck (Kintek)

Kintek power milling chucks offer an extremely versatile clamping option compared to traditional methods eg. end mill holders/side lock arbors. You are able to clamp various diameters via the use of m...

Size

Diameter (mm)	20 - 32

Starting at €272.82 €227.35

View Products

Power Milling Chucks