Carbide Machine Reamers | Cutwel - Hole Making Tool Specialists

Straight Flute Carbide NC Machine Reamer - K4101 (YG-1)

The YG-1 K4101 series Reamer has a solid micrograin carbide substrate with sizes ranging from 2-20mm diameter. These come with whole number shanks making them ideal for clamping within hydraulic chuck...

Solid Micrograin Carbide
NC Machine Reamer
For Machining Steel, Stainless Steel, Titanium, Cast Iron & Non-Ferrous
O.D. Tolerance DIN1420 for H7
Whole Number Shank
Ideal for Hydraulic Chucks
Plain Shank (DIN6535HA Tolerance)
Straight Flutes, Right Hand Cut
For Machining Through & Blind Holes
Unequal Flute Spacing
Chamfer Angle - Up to 3mm: 15°, Over 3mm: 45°

Size

Diameter (mm)	2 - 20
Overall Length (mm)	50 - 195
Flute Length (mm)	11 - 60
Shank (mm)	4 - 20

Starting at €58.36 €48.63

View Products

Solid Carbide Spiral Flute Machine Reamer in 0.01mm Increments (Beck)

Beck Solid Carbide Machine Reamers are available in 0.1mm increments from 1-12mm. These spiral flute reamers have a high level of hardness and good heat resistance to allow for high performance reamin...

Solid Micrograin Carbide
Chucking Machine Reamer
For Machining Steel, Stainless Steel, Titanium, Cast Iron & Non-Ferrous
Parralel Shank
Ideal for Hydraulic Chucks
Plain Shank (DIN6535HA Tolerance)
Spiral Flute Geometry
For Machining Through & Blind Holes
High Hardness & Good Heat Resistance

Size

Diameter (mm)	1 - 12
Overall Length (mm)	50 - 151
Flute Length (mm)	6 - 44
Shank (mm)	3 - 12

Starting at €71.39 €59.49

View Products

Left Hand Spiral Flute Carbide NC Machine Reamer - K4111 (YG-1)

The YG-1 K4111 series Reamer has a solid micrograin carbide substrate with sizes ranging from 2-20mm diameter. These come with whole number shanks making them ideal for clamping within hydraulic chuck...

Solid Micrograin Carbide
NC Machine Reamer
For Machining Steel, Stainless Steel, Titanium, Cast Iron & Non-Ferrous
O.D. Tolerance DIN1420 for H7
Whole Number Shank
Ideal for Hydraulic Chucks
Plain Shank (DIN6535HA Tolerance)
Left Hand Spiral Flutes, Right Hand Cut
For Machining Through & Blind Holes
Unequal Flute Spacing
Chamfer Angle - Up to 3mm: 15°, Over 3mm: 45°

Size

Diameter (mm)	2 - 20
Overall Length (mm)	50 - 195
Flute Length (mm)	11 - 60
Shank (mm)	4 - 20

Starting at €58.36 €48.63

View Products

Carbide Reamer for Hardened Steel up to 67Hrc - 22.1490 Series (Karnasch)

The 22.1490 series karnasch hardened steel reamer is ideal for reaming operations on high hardness materials up to 67 Rockwell....

High Speed Steel Substrate
Hand Reamer with Square Drive Shank
O.D. Tolerance DIN1420 for H7
For Machining Steel, Stainless Steel, Cast Iron & Non-Ferrous
Left Spiral Flutes, Right Hand Cut
For Through Holes

Size

Diameter (mm)	2.97 - 12.03
Overall Length (mm)	65 - 150
Flute Length (mm)	16 - 45
Shank (mm)	4 - 12

Starting at €125.47 €104.56

View Products

HNC-VA (Inox) Carbide Spiral Flute Through Coolant Reamer for Through Holes - 043270 Series (Beck)

The Beck HNC-VA carbide reamers are excellent for high performance reaming operations on Stainless Steel (also suitable for some steels). The 043270 series come with a through coolant hole and a spira...

Beck HNC-VA (Inox) series carbide machine reamer
Spiral flute geometry for through holes
Through coolant available
High performance BSP coating
Ideal for high performance machining of Stainless Steel and Steel
Right hand cutting geometry
H7 or +0.004 tolerance, please check before ordering

Size

Diameter (mm)	3.97 - 20
Overall Length (mm)	75 - 150
Flute Length (mm)	12 - 25
Shank (mm)	6 - 20

Starting at €297.10 €247.58

View Products

HNC-Speed Carbide Straight Flute Through Coolant Reamer for Blind Holes - 043261 Series (Beck)

The Beck HNC-Speed carbide reamers are excellent for high performance reaming operations on Steel and Cast Iron materials. The 043261 series comes with a through coolant hole and a straight flute geom...

Beck HNC-Speed series carbide machine reamer
Straight flute geometry for blind holes
Through coolant available
High performance BSP coating
Ideal for high performance machining of Steel and Cast Iron
Right hand cutting geometry
H7 or +0.004 tolerance, please check before ordering

Size

Diameter (mm)	7.99 - 7.99
Overall Length (mm)	100 - 100
Flute Length (mm)	16 - 16
Shank (mm)	8 - 8

Starting at €311.04 €259.20

View Products

HNC-Speed Carbide Spiral Flute Through Coolant Reamer for Through Holes - 043260 Series (Beck)

The Beck HNC-Speed carbide reamers are excellent for high performance reaming operations on Steel and Cast Iron materials. The 043260 series come with a through coolant hole and a spiral flute geometr...

Beck HNC-Speed series carbide machine reamer
Spiral flute geometry for through holes
Through coolant available
High performance BSP coating
Ideal for high performance machining of Steel and Cast Iron
Right hand cutting geometry
H7 or +0.004 tolerance, please check before ordering

Size

Diameter (mm)	5.02 - 12
Overall Length (mm)	75 - 120
Flute Length (mm)	12 - 20
Shank (mm)	6 - 12

Starting at €287.48 €239.57

View Products

HNC-VA (Inox) Carbide Straight Flute Through Coolant Reamer for Blind Holes - 043271 Series (Beck)

The Beck HNC-VA carbide reamers are excellent for high performance reaming operations on Stainless Steel (also suitable for some steels). The 043271 series come with a through coolant hole and a strai...

Beck HNC-VA (Inox) series carbide machine reamer
Straight flute geometry for blind holes
Through coolant available
High performance BSP coating
Ideal for high performance machining of Stainless Steel and Steel
Right hand cutting geometry
H7 or +0.004 tolerance, please check before ordering

Size

Diameter (mm)	3.97 - 20
Overall Length (mm)	75 - 150
Flute Length (mm)	12 - 25
Shank (mm)	6 - 20

Starting at €297.10 €247.58

View Products