Hardened Steel Carbide Drills - Solid Carbide Drills

TiAIN Coated Carbide Hardened Steel Dream Drill - DH500 Series (YG-1)

The YG-1 DH500 Dream Drills are designed for high performance drilling of high hardened steels (HRc50-HRc70). These are self centering and can drill to a h7 tolerance which eliminates any reaming oper...

Micrograin Carbide Substrate
TiAlN Coated High Performance Drill
For High Performance Drilling on High Hardened Steel
15 degree Helix to Maximise Rigidity
Self Centering with 140 degree Drill Point
Eliminates Reaming Operations

Size

Diameter (mm)	2.6 - 14
Overall Length (mm)	44 - 125
Flute Length (mm)	14 - 77
Shank (mm)	3 - 14

Starting at €24.97 €20.81

View Products

Coated Carbide K-Drill for Hardened Steels - 22.0468 Series (Karnasch)

The Karnasch 22.0468 K-Drills are designed for high performance drilling of high hardened steels (HRc55-HRc70). These are self centering and can drill to a h7 tolerance which eliminates any reaming op...

Micrograin Carbide Substrate
For High Performance Drilling on Hardened Steel HRc55-70 & Cast Iron
Special 15 degree Helix for High Strength
3xD Stub Length
Self Centering with 140 degree Drill Point
Eliminates Reaming Operations

Size

Diameter (mm)	0.3 - 14
Overall Length (mm)	38 - 125
Flute Length (mm)	2.5 - 77
Shank (mm)	3 - 14

Starting at €125.70 €104.75

View Products

KMH 15° Coated Carbide Stub Drill for Hardened Steel - B941A Series (Kennametal)

KMH solid carbide drills are engineered for hard material applications up to 65HRc. The B941 series consists of a special fine-grain carbide substrate with extreme high hardness properties. The 15° h...

Engineered for hard material applications up to 65HRc
Special fine-grain carbide substrate with extreme high hardness properties
15° helix angle maximises stability in applications above 54HRc
High temperature and shock resistant AlTiN coating provides outstanding tool life
An increased core strenghtens the drill and the curved cutting edge with corner chamfer prevents chipping

Size

Diameter (mm)	2.5 - 14
Overall Length (mm)	50 - 107
Flute Length (mm)	11 - 43
Shank (mm)	3 - 14

Starting at €63.64 €53.03

View Products

KMH 30° Coated Carbide Stub Drill for Hardened Steel - B951A Series (Kennametal)

KMH through coolant solid carbide drills are engineered for hard material applications up to 65HRc. The B951 series has an increased 30° rake angle to improve chip evacuation and has a higher toughne...

Through coolant solid carbide drill, engineered for hard material applications up to 65HRc
Increased 30° rake angle to improve chip evacuation
High toughness and edge strength
High temperature and shock resistant AlTiN coating provides outstanding tool life
An increased core strenghtens the drill and the curved cutting edge with corner chamfer prevents chipping

Size

Diameter (mm)	3 - 16
Overall Length (mm)	62 - 133
Flute Length (mm)	14 - 63
Shank (mm)	6 - 16

Starting at €91.94 €76.62

View Products