Tool Changer Arm Positioning Kits | Cutwel

Capto compatible C6 Positioning device for tool changer arms. Supplied in Aluminium case....

Capto compatible C6 positioning device for tool changer arms
Supplied in aluminium case
High quality from Italy
Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

Starting at €1,341.11 €1,117.59

BT40 positioning device for tool changer arms
Control pin also included for spindle realignment
Supplied in aluminium case
High quality from Italy
Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

Starting at €1,478.00 €1,231.67

BT40 Positioning device for tool changer arms. Supplied in Aluminium case....

BT40 positioning device for tool changer arms
Supplied in aluminium case
High quality from Italy
Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

Starting at €993.02 €827.52

BT50 Positioning device for tool changer arms. Supplied in Aluminium case....

BT50 positioning device for tool changer arms
Supplied in aluminium case
High quality from Italy
Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

Starting at €1,259.77 €1,049.81

HSK100A Positioning device for tool changer arms. Supplied in Aluminium case....

HSK100A positioning device for tool changer arms
Supplied in aluminium case
High quality from Italy
Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

Starting at €1,836.00 €1,530.00

SK40 Positioning device for tool changer arms. Supplied in Aluminium case....

SK40 positioning device for tool changer arms
Supplied in aluminium case
High quality from Italy
Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

Starting at €993.02 €827.52

SK50 Positioning device for tool changer arms. Supplied in Aluminium case....

SK50 positioning device for tool changer arms
Supplied in aluminium case
High quality from Italy
Instructions for use: 1. After assembling the usual pull stud,insert the cone into the spindle manually. 2. Set up the flange into the tool changer arm and go closer to the spindle. 3. After positioning, try to insert the double-diameter control pin between the two pieces. Adjust the arm accordingly until you get the perfect coaxiality so that the control bar enters the flange and the cone holes with no interferences.

Starting at €1,259.77 €1,049.81