Aluminium & Non-Ferrous Carbide Drills - Solid Carbide Drills

Uncoated Carbide Stub Alu-Drill for Aluminium - DCA40 Series (Cutwel Pro)

The Cutwel-Pro DCA40 Stub Length Carbide Alu-Drills are designed for 3xD performance drilling of Aluminium & Copper. These drills are self centering and the 40 degree helix with deep flute pockets aid...

Micrograin Carbide Substrate
ALU Geometry with 40 degree Helix
For Performance Drilling on Aluminium, Non-Ferrous Alloys & Copper
3xD Stub Length
Deep Flute Pockets to Aid Chip Flow
Polished Flutes Prevent Built Up Edge
Self Centering with 118 degree Drill Point

Size

Diameter (mm)	2 - 16
Overall Length (mm)	38 - 115
Flute Length (mm)	12 - 58
Shank (mm)	2 - 16

Starting at €9.59 €7.99

View Products

Uncoated Carbide Jobber Alu-Drill - DCA60 Series (YG-1)

The Cutwel-Pro DCA60 Jobber Length Carbide Alu-Drills are designed for 5xD performance drilling of Aluminium & Copper. These drills are self centering and the 40 degree helix with deep flute pockets a...

Micrograin Carbide Substrate
ALU Geometry with 40 degree Helix
For Performance Drilling on Aluminium, Non-Ferrous Alloys & Copper
5xD Jobber Length
Deep Flute Pockets to Aid Chip Flow
Polished Flutes Prevent Built Up Edge
Self Centering with 118 degree Drill Point

Size

Diameter (mm)	2 - 20
Overall Length (mm)	49 - 205
Flute Length (mm)	24 - 140
Shank (mm)	2 - 20

Starting at €14.62 €12.18

View Products

TX Uncoated Carbide Through Coolant Jobber Drill for Close Tolerance Holes - B411 Series (Kennametal)

TX drills are best suited for high quality, close tolerance holes where surface finish is of paramount importance. The x-shaped, free cutting 130° point design are made for grey cast iron, nodular ir...

Designed for high quality, close tolerance holes where surface finish is of paramount importance
The x-shaped, free cutting 130° point design are made for grey cast iron, nodular iron and non-ferrous materials
Four-margin land design can help achieve tight diamter tolerances
Uncoated finish helps prevent built up edge in non-ferrous applications
Jobber length (5xD) with through coolant capabilities
Long tool life in abrasive materials such as cast iron and aluminium die-cast alloys

Size

Diameter (mm)	3.2 - 25
Overall Length (mm)	66 - 184
Flute Length (mm)	23 - 98
Shank (mm)	6 - 25

Starting at €112.36 €93.63

View Products

Uncoated Carbide Through Coolant Stub Alu Dream Drill for Aluminium - D5432 Series (YG-1)

The YG-1 D5432 Stub Length Carbide Alu-Dream Drills are designed for 3xD ultra high performance drilling of Aluminium & Copper. These through coolant drills are self centering and give exceptional sur...

Micrograin Carbide Substrate
ALU-Dream Drill for Ultra High Performance Drilling
Ideal for Drilling Aluminium, Non-Ferrous Alloys & Copper
Ultra High Feed Rates & Excellent Chip Control
Exceptional Surface Finish Due to Sharp Drill Point & Lapped Flutes
3xD Stub Length
Reaming Not Required
Through Coolant
Self Centering with 118 degree Drill Point

Size

Diameter (mm)	3 - 20
Overall Length (mm)	62 - 131
Flute Length (mm)	20 - 79
Shank (mm)	6 - 20

Starting at €44.66 €37.22

View Products

Uncoated Carbide Through Coolant Jobber Alu Dream Drill for Aluminium - D5433 Series (YG-1)

The YG-1 D5433 Jobber Length Carbide Alu-Dream Drills are designed for 5xD ultra high performance drilling of Aluminium & Copper. These through coolant drills are self centering and give exceptional s...

Micrograin Carbide Substrate
ALU-Dream Drill for Ultra High Performance Drilling
Ideal for Drilling Aluminium, Non-Ferrous Alloys & Copper
Ultra High Feed Rates & Excellent Chip Control
Exceptional Surface Finish Due to Sharp Drill Point & Lapped Flutes
5xD Jobber Length
Reaming Not Required
Through Coolant
Self Centering with 118 degree Drill Point

Size

Diameter (mm)	3 - 20
Overall Length (mm)	66 - 153
Flute Length (mm)	28 - 101
Shank (mm)	6 - 20

Starting at €57.76 €48.13

View Products

Uncoated Carbide Micro Alu K-Drill for Aluminium - 22.0360 Series (Karnasch)

The Karnasch 22.0360 Micro ALU K-Drills are designed for high performance small diameter drilling of Aluminium, Bronze & Copper. These drills are self centering and have polished flutes to prevent bui...

Micrograin Carbide Substrate
Micro Drill Starting From Just 0.5mm Diameter
ALU K-Drill for Small Diameter Drilling of Aluminium, Copper & Composites
Polished Flutes Prevent Built Up Edge
Self Centering with 130 degree Drill Point
Always use with a Tool Holder with 5 Micron (or less) Run-Out

Size

Diameter (mm)	0.5 - 3
Overall Length (mm)	39 - 39
Flute Length (mm)	6.5 - 16.5
Shank (mm)	3 - 3

Starting at €29.18 €24.32

View Products

Uncoated Carbide Through Coolant Long Length Alu Dream Drill for Aluminium - D5434 Series (YG-1)

The YG-1 D5434 Long Length Carbide Alu-Dream Drills are designed for 8xD ultra high performance drilling of Aluminium & Copper. These through coolant drills are self centering and give exceptional sur...

Micrograin Carbide Substrate
ALU-Dream Drill for Ultra High Performance Drilling
Ideal for Drilling Aluminium, Non-Ferrous Alloys & Copper
Ultra High Feed Rates & Excellent Chip Control
Exceptional Surface Finish Due to Sharp Drill Point & Lapped Flutes
8xD Long Length
Reaming Not Required
Through Coolant
Self Centering with 118 degree Drill Point

Size

Diameter (mm)	3 - 14
Overall Length (mm)	72 - 178
Flute Length (mm)	34 - 133
Shank (mm)	6 - 14

Starting at €115.27 €96.06

View Products

Uncoated Carbide Through Coolant Extra Long Alu K-Drill for Aluminium - 22.0392 Series (Karnasch)

The Karnasch 22.0392 Extra Long Length MQL Carbide K-Drills are designed for ...

Micrograin Carbide Substrate
MQL Type <40xD Extra Long ALU K-Drill
Deep Hole Drilling of Aluminium, Copper & Composites
Lapped Flutes Prevent Built Up Edge
Through Coolant
Self Centering with 137 degree Drill Point
Recommended to be used with High Pressure Coolant (50+BAR)
Always use with a Tool Holder with 5 Micron (or less) Run-Out

Size

Diameter (mm)	1 - 9.8
Overall Length (mm)	55 - 380
Flute Length (mm)	8 - 330
Shank (mm)	4 - 10

Starting at €165.38 €137.82

View Products