Routing Tools For Non-Ferrous - Routing Tools - Milling Cutters

2 Flute Solid Carbide Router, Downcut Spiral - 57-700 Series (LMT Onsrud)

The 57-000 series Solid Carbide router from LMT Onsrud is designed as a general purpose spiral with several times the life of their high speed counterparts....

Application: aluminium, composite plastic
Used when a downward chipflow action is preferred
Helix angle: 30°

Starting at €49.03 €40.86

View Products

1 Flute Solid Carbide Router Straight V Flute, Metric - 61-400 Series (LMT Onsrud)

The 61-400 series Solid Carbide router from LMT Onsrud is designed to combine the fast free cutting of O flute geometry with the tool life available from solid carbide particularly in small diameters....

Application: soft wood, aluminium sheet
Straight o flute

Size

Diameter (mm)	4 - 12
Overall Length (mm)	6 - 12
Flute Length (mm)	16 - 35
Shank (mm)	6 - 12

Starting at €59.53 €49.61

View Products

2 Flute Solid Carbide Router, Upcut Foam Cutters - 52-550 Series (LMT Onsrud)

The 52-550 series Solid Carbide router from LMT Onsrud are foam cutters for thick material with upward chip flow....

Application: foam
Two flute upcut
Helix angle: 25°

Starting at €88.33 €73.61

View Products

2 Flute Solid Carbide Router, Upcut Spiral Wood Rout - 52-00 Series (LMT Onsrud)

The 52-000 series Solid Carbide router from LMT Onsrud is designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired....

Application: soft wood, hard wood, wood composite
Two flute upcut spiral
Designed for routing where upward chip removal, tool rigidity, long life and high quality finish is desired
Helix angle: 30°

Starting at €42.25 €35.21

View Products

2 Flute Solid Carbide Router, Upcut Spiral - 52-00 Series (LMT Onsrud)

The 52-000 series Solid Carbide router from LMT Onsrud is designed as a general purpose spiral with several times the life of their high speed steel counterparts....

Application: fibreglass, solid surface, aluminium slab
Two flute upcut
Designed as a general purpose spiral
Used when upward chip flow is preferred
Helix angle: 30°

Starting at €49.03 €40.86

View Products

2 Flute HSS Router, Downcut - 49-00 Series (LMT Onsrud)

The 49-000 series HSS router from LMT Onsrud has many uses in trimming and routing primarily with hand held routers....

Application: soft wood, hard wood, aluminium sheet
Provides a smoother finish than single flute tools
Designed and toleranced for air routers with guide bushings

Starting at €15.30 €12.75

View Products

1 Flute Solid Carbide Router Upcut Spiral O Flute - 63-900 Series (LMT Onsrud)

The 63-900 series Solid Carbide router from LMT Onsrud are high speed cutters for machining aluminium sheet and block material. These tools are optimised for use on high-speed CNC mills, high speed ma...

Application: aluminium sheet, aluminium Plate
For machining aluminium sheet and block material
For use on high-speed CNC mills, high speed machining centers and CNC routers
Helix angle: 22°

Size

Diameter (mm)	2 - 10
Overall Length (mm)	64 - 76
Flute Length (mm)	6 - 38
Shank (mm)	4 - 10

Starting at €71.29 €59.41

View Products

1 Flute Solid Carbide Router Downcut Spiral O Flute - 62-600 Series (LMT Onsrud)

The 62-600 series Solid Carbide router from LMT Onsrud are high speed cutters for machining aluminium sheet material. These tools are optimised for use on high-speed CNC mills, high speed machining ce...

Application: aluminium sheet, aluminium plate
High speed cutters for machining aluminium sheet material
For use on high-speed CNC mills, high speed machining centers and CNC routers
1 flute downcut spiral o flute

Starting at €51.41 €42.84

View Products

1 Flute Solid Carbide Router Upcut Spiral O Flute For Acrylic - 63-500 Series (LMT Onsrud)

The 63-500 series Solid Carbide router from LMT Onsrud are tools are designed to cut acrylics and achieve long tool life....

Application: acrylic
Unique cutting geometry produces a smooth edge finish regardless if it is cast or extruded acrylic
Long tool life is achieved
1 flute upcut spiral O flute

Starting at €56.98 €47.48

View Products

1 Flute Solid Carbide Router Upcut Spiral O Flute For Acrylic - 63-600 Series (LMT Onsrud)

The 63-600 series Solid Carbide router from LMT Onsrud are high speed cutters for machining aluminium sheet and block material. These tools are optimised for use on high-speed CNC mills, high speed ma...

Application: aluminium sheet, aluminium Plate
Optimised for use on high-speed CNC mills, high speed machining centers and CNC routers
High speed cutters for machining aluminium sheet and block material
1 flute upcut spiral O flute

Starting at €51.41 €42.84

View Products

1 Flute Solid Carbide Chamfering Router - EDC Series (LMT Belin)

The EDC series 1 flute solid carbide chamfering router for aluminium, wood, foamboard, PVC & high pressure composites....

Cutting end mills for plastics and woods with a 45° chamfer.
This cutter allows to cut materials and to make a chamfer at the same time
Avoid delamination when cutting laminated sheets or pasted paper sheets

Size

Diameter (mm)	4 - 4
Overall Length (mm)	60 - 60
Flute Length (mm)	4.3 - 6.3
Shank (mm)	8 - 8

Starting at €51.65 €43.04

View Products

1 Flute Solid Carbide Chamfering Router - EDAC Series (LMT Belin)

The EDAC series 1 flute solid carbide chamfering router for aluminium, wood, foamboard, PVC & high pressure composites....

Cutting end mills for non-ferrous metals and aluminum with a chamfer (can also cut plastics)
This cutter allows to cut materials and make a chamfer at the same time. These tools avoid delamination when laminated sheets

Size

Diameter (mm)	4 - 4
Overall Length (mm)	50 - 50
Flute Length (mm)	2.3 - 3.3
Shank (mm)	6 - 6

Starting at €86.98 €72.48

View Products

3 Flute Solid Carbide Router With Chipbreakers - STRATR Series (LMT Belin)

The STRATR series 3 flute solid carbide router with chipbreakers for high pressure laminates and phenolic materials....

End mills for HPL and phenolic materials (very abrasives materials)
Three flutes allow improved tool life whereas chipbreakers reduce stress on the spindle

Size

Diameter (mm)	6 - 8
Overall Length (mm)	20 - 20
Flute Length (mm)	60 - 64
Shank (mm)	6 - 8

Starting at €118.40 €98.67

View Products

2 Flute Solid Carbide Chamfer Router - FCOB Series (LMT Belin)

The FCOB series 2 flute solid carbide chamfer router is suitable for grooving and folding applications on diebond or alcubond materials....

Carbide tipped milling cutters designed to groove and fold ACM panels
Available with various chamfer angles including, 45°, 54° and 67.5°.

Size

Diameter (mm)	19.05 - 20
Overall Length (mm)	60 - 60
Flute Length (mm)	3.6 - 8.5
Shank (mm)	8 - 9.52

Starting at €166.34 €138.62

View Products

1 Flute Solid Carbide Chamfer Router - PLIH Series (LMT Belin)

The PLIH series 1 Flute Solid Carbide solid carbide chamfer router for aluminium diebond or alcubond grooving and folding, not recommended in plastics....

Solid carbide milling cutter designed to groove and fold ACM panels like Dibond® or Alucobond® as well as aluminum (use coolant to cut aluminum)
This cutter gives better surface finish, higher cutting speeds and effective chip evacuation
Available with various chamfer angles including, 45°, 54° and 67.5°
This geometry is not recommended in plastics

Size

Diameter (mm)	6 - 12
Overall Length (mm)	60 - 60
Flute Length (mm)	20 - 20
Shank (mm)	6 - 8

Starting at €68.70 €57.25

View Products