Wide Range Digital Calipers | Cutwel

The 1117 Series Digital Caliper has a resolution of 0.01mm/0.0005" and shows a data output. The Caliper is made of stainless steel for longer tool life and durability from machine shop wear. Sizes ran...

Resolution: 0.01mm/0.0005”.
Button function: on/off, zero, mm/inch,ABS, data preset.
Battery CR2032.
Data output.
Made of stainless steel.
Optional Accessory: data output cable (code7302-SPC5A).

Starting at €164.80 €137.33

View Products

Digital Caliper for Wide Measurements up to 1.5 Metres - 1136 Series (Insize)

The 1136 Digital Vernier Caliper, with inside and stepped outside measuring jaws. The Caliper is made of stainless steel for longer tool life and durability from machine shop wear. With optional SPC ...

Resolution: 0.01mm/0.0005”.
Button function: on/off, zero, mm/inch,ABS, data preset.
Battery CR2032.
Data output.
Made of stainless steel.
Optional Accessory: data output cable (code7302-SPC5A).

Starting at €411.11 €342.59

View Products

IP67 Waterproof Bluetooth Ultra Light Digital Caliper - 30-810 Series (Sylvac)

The 30-811 Sylvac Digital Caliper offers IP67 protection from even the toughest workshop environments. It's frame is made of a special aluminium profile reinforced with 4 stainless steel guide rods, m...

IP67 Water & Dust Protection.
Ultra-light design due to special aluminium profile reinforced with 4 stainless steel guide rods.
Extra large display unit with 20mm high digits.
Integrated Bluetooth wireless technology (connectivity with Sylcom Pro, Sylvan Anywhere and Vmux measuring software).
Long outer jaws (200mm) with measuring part made of hardened steel (124x8mm) coated with Titanium Nitride (TiN).
Supplied with calibration certificate.
Removable upper studs with hardened metal pin Ø5mm for internal measurements.
Made in Switzerland.
Sylvac is part of the Bowers Group - market leaders in quality metrology products.

Starting at €692.34 €576.95

View Products

Digital Caliper - 1135 Series (Insize)

The 1135 Digital Vernier Caliper, with inside and outside measuring jaws. The Caliper is made of stainless steel for longer tool life and durability from machine shop wear. With optional SPC cable da...

Resolution: 0.01mm/0.0005”.
Button function: on/off, zero, mm/inch,ABS, data preset.
Battery CR2032.
Data output.
Made of stainless steel.
Optional Accessory: data output cable (code7302-SPC5A).

Starting at €513.00 €427.50

View Products

Digital Caliper for Wide Measurements up to 2 meter - 1106 Series (Insize)

The 1106 Digital Vernier Caliper For Wide Measurements, with stepped outside measuring jaws. The Caliper is made of stainless steel for longer tool life and durability from machine shop wear. Sizes r...

Resolution: 0.01mm/0.0005”.
Button function: on/off, zero, mm/inch,ABS, data preset.
Battery CR2032.
Data output.
Made of stainless steel.
Optional Accessory: data output cable (code7302-SPC5A).

Starting at €325.31 €271.09

View Products

ABSOLUTE Digimatic Long Beam Digital Caliper - 500-G Series (Mitutoyo)

This ABSOLUTE Long Digimatic caliper incorporates Mitutoyo's ABSOLUTE scale and is available with a measuring range from 450mm to 1000mm. It can be used to measure outside and inside dimensions, depth...

Range: up to 1000mm / 40".
Resolution: 0.01mm / .0005".
Made by Mitutoyo - Market leader in the engineering measuring tool sector.
Long Digimatic caliper incorporating Mitutoyo's ABSOLUTE scale and available with a measuring range from 450 mm to 1000 mm.
Can measure outside and inside dimensions, depth, and steps.

Starting at €1,175.63 €979.69

View Products

ABSOLUTE Digimatic IP67 Digital Nib Jaw Caliper - 550 Series (Mitutoyo)

The 550 series ABSOLUTE Digimatic Nib Jaw Caliper offers a resolution of 0.01 mm with corresponding accuracy. It is IP67 dust and waterproof, which prevents damage from coolant splashes. This model is...

Range: up to 1000mm / 40".
Made by Mitutoyo - Market leader in the engineering measuring tool sector.
Offers a resolution of 0.01 mm with corresponding accuracy.
Incorporates Mitutoyo's ABSOLUTE measurement system. No need to reset the origin after switching on.
Models 550-311-10 and 550-341-10 are IP67 rated.
Data output function allows integration into statistical process control and measurement systems.
OFFSET button automatically adds the thickness of the inside jaws to the measured value so that the result can be read directly (550-311-10 and 550-341-10). Preset function enables an arbitrary reference value to be added to the measured value for comparison measurements (550-341-10).

Starting at €581.22 €484.35

View Products

ABSOLUTE Digimatic IP67 Digital Nib/Standard Jaw Caliper - 551 Series (Mitutoyo)

The 551 series ABSOLUTE Digimatic Nib/Standard Jaw Caliper offers a resolution of 0.01 mm with corresponding accuracy. It is IP67 dust and waterproof, which prevents damage from coolant splashes. This...

Range: up to: 1000mm / 40".
Made by Mitutoyo - Market leader in the engineering measuring tool sector.
Offers a resolution of 0.01 mm with corresponding accuracy.
Incorporates Mitutoyo's ABSOLUTE measurement system. No need to reset the origin after switching on.
Models 550-311-10 and 550-341-10 are IP67 rated.
Data output function allows integration into statistical process control and measurement systems.
OFFSET button automatically adds the thickness of the inside jaws to the measured value so that the result can be read directly (550-311-10 and 550-341-10). Preset function enables an arbitrary reference value to be added to the measured value for comparison measurements (550-341-10).

Starting at €662.15 €551.79

View Products

ABSOLUTE Digimatic IP66 Carbon Fibre Digital Caliper - 552-A Series (Mitutoyo)

This 552 Series caliper is extremely lightweight as it uses CFRP (Carbon Fibre Reinforced Plastics) in the beam and jaws. Mitutoyo calipers are robust and of the highest quality. This Model has SPC da...

Range: up to 2000mm / 80".
Resolution: 0.01mm/ 0.0005".
Made by Mitutoyo - Market leader in the engineering measuring tool sector.
A lightweight Digimatic caliper that uses CFRP (Carbon Fibre Reinforced Plastics) in the beam and jaws.
Interchangeable measuring jaws available as optional accessories.
Data output function allows integration into statistical process control and measurement systems.

Starting at €1,068.64 €890.53

View Products

ABSOLUTE Digimatic IP66 Long Jaw Carbon Fibre Digital Caliper - 552-B Series (Mitutoyo)

This 552 Series caliper is extremely lightweight as it uses CFRP (Carbon Fibre Reinforced Plastics) in the beam and jaws. Mitutoyo calipers are robust and of the highest quality. This Model has SPC da...

Range: up to 2000mm / 80".
Resolution: 0.01mm / 0.0005".
Made by Mitutoyo - Market leader in the engineering measuring tool sector.
A lightweight Digimatic caliper that uses CFRP (Carbon Fibre Reinforced Plastics) in the beam and jaws.
Data output function allows integration into statistical process control and measurement systems.

Starting at €1,679.90 €1,399.92

View Products

ABSOLUTE Digimatic IP66 Ceramic Jaw Carbon Fibre Digital Caliper - 552-C Series (Mitutoyo)

This 552 Series caliper is extremely lightweight as it uses CFRP (Carbon Fibre Reinforced Plastics) in the beam and jaws. Zirconia ceramic contact surfaces give very high resistance to wear. Mitutoyo ...

Range: up to 600mm / 24".
Accuracy: 0.04mm / ±0.002".
Resolution: 0.01mm/ 0.0005".
Made by Mitutoyo - Market leader in the engineering measuring tool sector.
A lightweight Digimatic caliper that uses CFRP (Carbon Fibre Reinforced Plastics) in the beam and jaws.
Rustless and nonmagnetic. Suitable for measuring magnetic components.
Zirconia ceramic contact surfaces for high resistance to wear.
Data output function allows integration into statistical process control and measurement systems.
Interchangeable measuring jaws available as optional accessories.

Starting at €1,741.21 €1,451.01

View Products