Call us 8am - 6pm 015686757

help Help
basket-added
cross Close Menu
Shop
Accounts
burger cross View Products Close Menu
cross
help Help
basket-added Cart

Two Day Delivery
only €9.00 on all orders

Expert Technical Team
Get advice on 0333 0155091

No Time Wasted on Irish Deliveries
Orders 100% customs cleared with no fees

2 Point Inside Micrometers

2 Point Inside Micrometers

Our range of 2 point inside micrometers from Insize and market leader Mitutoyo is supplied in various sizes and styles including screw thread micrometers and caliper micrometers. Dial and digital models available.

Filter By arrow
carrat-down

11 Items

Sort By
carrat-down
sort-descending
IP65 MicroGauge 2-Point Bore Gauge Head - MG-W Series (Bowers)
IP65 MicroGauge 2-Point Bore Gauge Head - MG-W Series (Bowers)

Bowers MicroGauge 2-point bore gauging system has been designed specifically for measuring small bores between 1-10mm. The digital readout and measuring head together are about the same size and forma...

  • System supports bore sizes from 1mm to 10mm.
  • All setting rings are supplied as standard with with UKAS calibration.
  • Easy-to-read LCD screen.
  • IP65 protection.
  • Heads and digital readouts sold seperately.
  • Data output via RS232/USB proximity sensor.
  • Can alter resolution between 0.01/0.001/0.0005mm.
  • Accuracy: 0.001mm.
  • Simple 2-button operation.
  • Hard-chromed ball contacts.
  • Optional WiFi data output.

Starting at €90.47 €75.39

View Products
Extension for Bowers Bore Gauges & Micrometers - EGX Series (Bowers)
Extension for Bowers Bore Gauges & Micrometers - EGX Series (Bowers)

Extend the reach of your Bowers bore gauges and micrometers for deep hole applications (over 6mm only). Suitable for use with Bowers Digital Pistol Grip Bore Gauges and Digital Bore Micrometers....

  • Extensions available from 6mm bore size.
  • Designed to give more reach in deep hole measurement.
  • For use only with Bowers measuring tools.
  • Can be used with Bowers Pistol Grip Bore Gauges & Three Point Bore Micrometers.

Starting at €117.67 €98.06

View Products
Digital Inside Micrometers - 280-DDL Series (Moore & Wright)
Digital Inside Micrometers - 280-DDL Series (Moore & Wright)

This Moore & Wright digital inside micrometer measures the inside of a bores or holes. With a satin chrome finished frame and supplied in a case....

  • Measures the inside of a bore and hole
  • Complies with DIN 863
  • Digital functions: mm/inch conversion, on/off, zero-setting, battery low indication, hold, 0...ABS
  • Pin diameter 2mm, length 5mm (only applicable to MW280-01DDL)
  • Satin chrome finished frame
  • Constant force ratchet thimble
  • Locking clamp for positive locking of spindle
  • Supplied in case

Starting at €263.75 €219.79

View Products
IP65 MicroGauge 2-Point Bore Gauge Digital Readout - MG-U Series (Bowers)
IP65 MicroGauge 2-Point Bore Gauge Digital Readout - MG-U Series (Bowers)

Bowers MicroGauge 2-point bore gauging system has been designed specifically for measuring small bores between 1-10mm. The digital readout and measuring head together are about the same size and forma...

  • MGU1 suitable for measuring heads from 1mm to 1.5mm. MGU2 is suitable for measuring heads from 1.5mm to 10mm.
  • System supports bore sizes from 1mm to 10mm.
  • All setting rings are supplied as standard with with UKAS calibration.
  • Easy-to-read LCD screen.
  • IP65 protection.
  • Heads and digital readouts sold seperately.
  • Data output via RS232/USB proximity sensor.
  • Can alter resolution between 0.01/0.001/0.0005mm.
  • Accuracy: 0.001mm.
  • Simple 2-button operation.
  • Hard-chromed ball contacts.
  • Optional WiFi data output.

Starting at €505.46 €421.22

View Products
Inside Caliper Micrometer (Metric) - 145 Series (Mitutoyo)
Inside Caliper Micrometer (Metric) - 145 Series (Mitutoyo)

The Mitutoyo 145 Series Inside Caliper Micrometer is designed for accurate diameter measurement of short holes or bores. The Inside Caliper Micrometers have carbide measuring faces and are equipped wi...

  • Designed for accurate measurement of the diameter of small and short holes and bores.
  • Carbide measuring faces.
  • Equipped with a constant measuring-force device.

Starting at €300.42 €250.35

View Products
Digital Inside Caliper Micrometer - 345 Series (Mitutoyo)
Digital Inside Caliper Micrometer - 345 Series (Mitutoyo)

The Mitutoyo 345 Series Digimatic Inside Caliper Micrometer is designed for accurate measurement of the diameter of small and short holes or bores. Caliper Micrometers have carbide measuring faces and...

  • Designed for accurate measurement of the diameter of small and short holes and bores.
  • Carbide measuring faces.
  • Equipped with a constant measuring-force device.

Starting at €804.40 €670.33

View Products
Inside Micrometer - 3220 Series (Insize)
Inside Micrometer - 3220 Series (Insize)

The Insize 3220 Vernier micrometer for internal measurements, with ratchet stop and carbide measuring faces create a durable, ware resistant tool which allows for repeated measurements. Measurement up...

  • Graduation: 0.01mm.
  • Carbide measuring faces.
  • Ratchet stop.
  • Optional accessary: setting ring (code 6312).

Starting at €105.16 €87.63

View Products
Microgauge 2-Point Bore Gauge Sets - SMG-M Series (Bowers)
Microgauge 2-Point Bore Gauge Sets - SMG-M Series (Bowers)

Set includes digital readout with various measuring heads and setting rings. Bowers MicroGauge 2-point bore gauging system has been designed specifically for measuring small bores between 1-10mm. The ...

  • Supplied with digital readout and varying numbers of measuring heads and setting rings.
  • System supports bore sizes from 1mm to 10mm.
  • All setting rings are supplied as standard with with UKAS calibration.
  • Easy-to-read LCD screen.
  • IP65 protection.
  • Heads and digital readouts sold seperately.
  • Data output via RS232/USB proximity sensor.
  • Can alter resolution between 0.01/0.001/0.0005mm.
  • Accuracy: 0.001mm.
  • Simple 2-button operation.
  • Hard-chromed ball contacts.
  • Optional WiFi data output.

Starting at €1,110.25 €925.21

View Products
Digital Inside 2 Point Micrometer - 3520 Series (Insize)
Digital Inside 2 Point Micrometer - 3520 Series (Insize)

The Digital Inside 2 Point Micrometer has a digital output with a 0.001mm/0.0005" resolution. The 3520 Series Micrometer includes features such as a LR44 baterry with an automatic power off, ratchet s...

  • Resolution 0.001mm/0.0005”.
  • Button function: on/off, set, mm/inch, ABS/INC.
  • Data output.
  • LR44 battery, automatic power off.
  • Ratchet stop.
  • Carbide measurring faces.
  • Optional accessory: data output cable, setting ring (code 6312)

Starting at €380.71 €317.26

View Products
Internal Screw Thread Micrometer - 3640 Series (Insize)
Internal Screw Thread Micrometer - 3640 Series (Insize)

The Insize 3640 internal screw thread micrometer can be used to measure the pitch diameter of a screw thread. It comes with a ratchet stop for even and consistent measurements....

  • Measuring pitch diameter of screw thread.
  • Graduation 0.01mm.
  • Ratchet stop.
  • Optional accessory: Measuring tips for internal screw thread micrometer (7385 series)

Starting at €2,135.65 €1,779.71

View Products
Inside Caliper Micrometer (Imperial) - 145 Series (Mitutoyo)
Inside Caliper Micrometer (Imperial) - 145 Series (Mitutoyo)

The Mitutoyo 145 Series Inside Caliper Micrometer is designed for accurate diameter measurement of short holes or bores. The Inside Caliper Micrometers have carbide measuring faces and are equipped wi...

  • Designed for accurate measurement of the diameter of small and short holes and bores.
  • Carbide measuring faces.
  • Equipped with a constant measuring-force device.

Starting at €343.34 €286.12

View Products